סטודנט.ית לפרויקט מחקרי בפלמינגו

* עניין במחקר בתחום הזרימה ו/או ביו-מכניקה
* יכולת עבודה עצמאית ובצוות
* ידע בסיסי בצילום וניתוח תמונה (יתרון)

לזכר חללי מערכות ישראל ונפגעי פעולות האיבה

היום קיימנו טקס מרגש להענקת מלגות הנצחה לזכר חללי מערכות ישראל ונפגעי פעולות האיבה.
בטקס נכחו משפחות שכולות, סטודנטים.ות, סגל אקדמי ומנהלי - כולנו התכנסנו יחד כדי לזכור, לכבד ולחזק את הקשר שבין זיכרון, ערכים והמשכיות.

חלקנו כבוד וזיכרון לנופלים – מתוך מחויבות להמשיך ולשאת את שמם ופועלם גם בתוך חיי היומיום.
במהלך הטקס שרו סטודנטים וסטודנטיות שירים שהוסיפו ממד אישי ומרגש לרגעי ההתייחדות.

מלגות ההצטיינות הוענקו לסטודנטים וסטודנטיות על הישגים ראויים לשבח, מתוך אמונה בהמשך הדרך ותחושת שליחות ותקווה עתיד טוב ובטוח יותר.

יהי זכרם של הנופלים והנרצחים ברוך.

 

שמות מקבלי מלגות ההנצחה:

- שחר אבירן – מלגה על שם רון אפרימי ז"ל

- עידן אברהמי – מלגה על שם רועי ארבל ז"ל

- אורן איזנבך – מלגה על שם יורם בוסתן ז"ל

- יואב אבן – מלגה על שם עמית בן-חורין ז"ל

- רועי אלמוג – מלגה על שם שייקה בן-ישי ז"ל

- הדר אנגל – מלגה על שם צבי בן-סירה ז"ל

- איתי אלדר – מלגה על שם עמרי בן שחר ז"ל

- גל גורני – מלגה על שם תומר גוטרמן ז"ל

- אמיר דיטמן – מלגה על שם רוני גולדמן ז"ל

- עדי דרור – מלגה על שם אייל גלר ז"ל

- שגיא טל – מלגה על שם משה גרסטנר ז"ל

- רועי לוינזון – מלגה על שם צבי הלר ז"ל

- יואב אלעד לירון – מלגה על שם בני (בנימין) וולפסון ז"ל

- זיו לסט – מלגה על שם יחיאל-מרדכי ויצמן ז"ל

- עמית מאיר – מלגה על שם אורן זיו ז"ל

- אפק מיכאלי – מלגה על שם יובל זילבר ז"ל

- גבריאל מנדלסון – מלגה על שם זוהר ליפשיץ ז"ל

- שובל מרום – מלגה על שם תומר מורד ז"ל

- עדי סלומון – מלגה על שם אילן ספיניה ז"ל

- פלג עז-ארי – מלגה על שם אריה יהודה פרקש ז"ל

- יואב פלד – מלגה על שם משה מנדל קרנר ז"ל

- עמית רוזן – מלגה על שם יצחק רויטר ז"ל

- אסף יושפה – מלגה על שם אהוד (אודי) שוורצברג ז"ל

- גיא נחמקין – מלגה על שם אברהם שמעוני ז"ל

 

תמונות נוספות: טקס הענקת מלגות הנצחה

 

A person standing at a podium

AI-generated content may be incorrect.

A person standing at a podium

AI-generated content may be incorrect.

A person playing a guitar in front of a screen

AI-generated content may be incorrect.

A group of people playing instruments

AI-generated content may be incorrect.

A group of people sitting in chairs

AI-generated content may be incorrect.

וובינר: פרויקט גמר בינלאומי - אוניברסיטת תל אביב בשיתוף האוניברסיטה הטכנית של מינכן

לסטודנטים/ות שנה ג' מהנדסה מכנית, חשמל וחומרים

 

06 במאי 2025, 13:00 
וובינר  

סמינר מחלקתי של ד"ר בן אמיר- השפעת פרמטרי תהליך ייצור תוספים על המאפיינים הדינמיים של AlSi10Mg

18 ביוני 2025, 14:00 - 15:00 
 
סמינר מחלקתי של ד"ר בן אמיר- השפעת פרמטרי תהליך ייצור תוספים על המאפיינים הדינמיים של AlSi10Mg

Influence of Additive Manufacturing Process Parameters on the Dynamic Properties of AlSi10Mg

Wednesday June 18th 2025 at 14:00 

Wolfson Building of Mechanical Engineering, Room 206 

 

 

Abstract:

Additive manufacturing by selective laser melting (AM-SLM), better known as 3D printing, is an advanced manufacturing approach in which a structure is fabricated by successive thin powder layers melted by a focused laser beam. The aerospace and automotive sectors are especially interested in the AM-SLM of AlSi10Mg to enabling the quick production of complex and customized structures. The AM-SLM of AlSi10Mg process involves manipulating several key parameters such as laser power, scanning speed, hatching distance, scanning pattern, fabrication orientation, and postprocessing techniques.

Fabrication parameters show limited effects at quasi-static loading; however, this is not the case at dynamic rates. Therefore, this study utilizes several split Hopkinson bar systems, generating dynamic compression, tension and shear loading to characterize the effect of those key parameters on the dynamic behavior. This behavior was correlated with microstructure and crystallographic texture.

The first part of this study characterizes the parameters dictated by the process. We found at dynamic rates, distinct plastic behavior was observed at samples built in different orientations. Hence, this alloy was characterized as strain rate dependent and anisotropic. Moreover, a higher distance from the build platform resulted in a higher surface hardness and dynamic performance due to rapid cooling mechanisms. Stress relief treatment changes microstructure, causing uniform and low residual stresses, resulting in softening of the mechanical property, regardless of build height.

The second part addressed the following questions: What is the most affecting controllable parameter? And, How and why does it affect the dynamic mechanical properties? A comprehensive Taguchi-based design of experiments examines the influence of those parameters. Notably, fabrication orientation emerges as a significant factor affecting dynamic properties, where we observed a clear linear relationship between crack paths and maximum dynamic stress.

Each component of this study contributes to engineers' understanding of the dynamic response of AM-SLM AlSi10Mg, enabling more accurate estimations of its mechanical behavior for various applications.

 

Bio:

Dr. Ben Amir joined the Cambridge University Solid Mechanics group under Professor Vikram Deshpande as a Research Associate after receiving the Blavatnik Fellowship. Ben holds a Ph.D. in Mechanical Engineering from Ben-Gurion University of the Negev. Ben's exceptional doctoral work was recognized with prestigious awards, including the Kreitman Dean's Award and the Nehemiah Lev-Zion Fellowship from the Council for Higher Education.

 

 

 

 

 

 

 

שבוע של ביקורים במעבדות המחקר, סדנאות מעשיות ושלל פעילויות מעוררות השראה

GNC (Guidance, Navigation & Control) engineer – Part time, 3rd year student job, on-site in Rishon Le-Zion

Qualifications:

3rd year B.Sc. in Electronics\Mechanical engineering, majoring control systems.

Hands-on experience and knowledge of C++, Python, ROS2 programming.

Problem solver, open mind thinker.

Team player with high interpersonal communication capabilities.

Responsible and highly motivated independent issue pusher.

 

Junior\Senior GNC (Guidance, Navigation & Control) and algorithms engineer – Full time job on-site in Rishon Le-Zion

Qualifications:

B.Sc. in Electronics\Mechanical engineering, majoring control systems.

Hands-on extensive experience and in-depth knowledge of C++, Python, ROS2 programming.

Problem solver, open mind thinker.

Team player with high interpersonal communication capabilities.

Responsible and highly motivated independent issue pusher.
Advantages:

EE Seminar: Class Filter - a Fast, Efficient, and Concurrent Dynamic Filter

12 במאי 2025, 15:00 
אולם 011, בניין כיתות חשמל  
EE Seminar: Class Filter - a Fast, Efficient, and Concurrent Dynamic Filter

Electrical Engineering Systems Seminar

 

Speaker: Hagay Halperin

M.Sc. student under the supervision of Prof. Guy Even

 

Monday, 12th May 2025, at 15:00

Room 011, Kitot Building, Faculty of Engineering

 

Class Filter - a Fast, Efficient, and Concurrent Dynamic Filter

Abstract

Filters, such as the Bloom filter, are widely used approximate membership query (AMQ) data structures. Filters are fast, compact, and have a wide range of applications. Dynamic filters, which support insertions, queries, and deletions, often have a trade-off between space efficiency and performance and are often not scalable for a concurrent use case.

In this thesis, we introduce the class filter - a dynamic filter that is space efficient, fast, robust, supports full concurrency and has scalable concurrent performance compared to other filters. The class filter’s architectures strive to minimize the mean memory access count and prioritize false query performance. We introduce the pipeline technique to increase operation performance, which may be used in other filters and dictionaries. Additionally, we obtain a space lower bound for dynamic filters with a dual-pool structure, showing that asymmetry between the pools benefits the total filter’s space efficiency. Our simulations show that the class filter structure benefits from this asymmetry.

We evaluated our implementation against many reference dynamic filters in many scenarios. Our benchmarks focus on both single-threaded and multithreaded scenarios. We also explore the ”Fixed-DB” case, where concurrent queries are executed on an instance of an immutable filter. Our implementation shows competitive performance gains in all scenarios.

 

הרישום לסמינר יבוצע באמצעות סריקת הברקוד למודל

Registration to the seminar will be done by scanning the barcode for the Moodle

 

 

 

פרופ' ליהי אדלר-אברמוביץ, פרופ' בריאן רוזן, פרופ' נתן שקד ופרופ' אלכסנדר גולברג מאוניברסיטת תל אביב מונו לעמיתים בכירים באקדמיה הלאומית לממציאים של ארה"ב כהוקרה על תרומתם לחדשנות ולמסחור טכנולוגיות פורצות דרך 

עמודים

אוניברסיטת תל אביב עושה כל מאמץ לכבד זכויות יוצרים. אם בבעלותך זכויות יוצרים בתכנים שנמצאים פה ו/או השימוש שנעשה בתכנים אלה לדעתך מפר זכויות
שנעשה בתכנים אלה לדעתך מפר זכויות נא לפנות בהקדם לכתובת שכאן >>